GROUTS & ANCHORING
UPGRADE CEMENTITIOUS TILE GROUT
READY TO USE CEMENTITIOUS COLOURED TILE JOINT FILLER
UPGRADE CEMENTITIOUS TILE GROUT Ready is a single component to use Cementitious coloured tile joint filler resistant to dust and dirt penetration.
PROPERTIES
- Cementitious, only water to be added
- Available in standard white and ivory shades
- Resistant to dust penetration
- Excellent bond with tiles
- Easy to Clean
- Can withstand mild floor cleaning agents
Applications
- Upgrade Cementitious Tile Grout is a gap filling material between different wall and floor tiles like:
• Ceramic
• Glazed
• Vitrified
• Mosaic
• Glass
• Mosaic
• Marble tiles
UPGRADE SMART LV INJECTION GROUT
LOW VISCOSITY MOISTURE INSENSITIVE INJECTION GROUT
UPGRADE LV INJECTION GROUT is a solvent free, odourless, based on high strength epoxy resin, low viscous grout for vertical and horizontal cracks.
PROPERTIES
- Cures without shrinkage
- High density ensures complete water displacement
- Good chemical resistance
- Excellent adhesion to salt-water immersed, cement bound substrates
Applications
- Smart LV injection Grout is used as an injectable resin to seal damp, wet and submerged cracks by high pressure injection
- For adhesion of concrete and steel in damp and wet condition (by water displacement)
UPGRADE SMART EPOXY TILE GROUT
3-COMPONENT EPOXY RESIN BASED TILE GROUT
UPGRADE SMART EPOXY TILE GROUT is a 3 components, solvent free,, high strength,based on specially formulated epoxy resin tile grout
PROPERTIES
- Hygienic and chemical resistant
- Provides high strength and durable joints
- Suitable for submerged conditions
- Better Pot life
- Suitable for joint width of 1 – 3 mm
- High Glossy aesthetic finish
- For interior & exterior use
- Available in different RAL shades
- Does not support growth of bacteria and fungus
Applications
- Grouting glazed tiles
- Mosaic
- Vitrified and fully
- vitrified tiles
- Ceramic tiles
- Industrial tiles
- Granites, marbles & other natural stones etc.
UPGRADE TUFLOR
NON-METALLIC MINERAL DRY SHAKE FLOOR HARDENER
UPGRADE TUFLOR is a one part, preblended, coloured mineral dry shake hardener for concrete comprising of cement, specially selected natural mineral aggregates, admixtures and pigments. UPGRADE TUFLOR provides an extremely hard wearing and abrasion resistant topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a coloured, dense and wear resistant smooth surface.
PROPERTIES
- High resistance to abrasion
- Reduce surface dust
- Improves resistance to impact
- Improves resistance to oils and greases
- Wide range of colour
- Easy application, Upgrade Tuflor is sprinkled onto the freshly placed concrete
- Even finish obtainable when properly smoothed
Applications
- Upgrade Tuflor is added to slab surface to improve their resistance to abrasion and inhibit dust formation.
- Upgrade Tuflor is suitable for all floor exposed to severe mechanical wear for example:
• Warehouse
• Quays
• Traffic lanes
• Engineering workshop
• Restaurants
• Museums
• Parking lots
UPGRADE SMART EPOXY MOISTURE INSENSITIVE GROUT
3-PART MOISTURE INSENSITIVE FREE FLOW HIGH STRENGTH EPOXY RESIN GROUT
UPGRADE MOISTURE INSENSITIVE GROUT is 3 part epoxy grout for high strength structure and columns.
PROPERTIES
- Moisture insensitive grout
- High early strength
- Cures without shrinkage
- Excellent adhesion to cement and metal substrate
- Easy to apply
- Free flowing
Applications
- Upgrade Moisture Insensitive Grout is used in the following places:
• Bridge bearing plates
• Machine bases
• Fixing bolts and anchors even for dynamic loading
• Rail tracks, vertically placed dowel bars
UPGRADE GENERAL PURPOSE GROUT
HIGH PRECISION, NON-SHRINK, EXPANDING POURING GROUT
UPGRADE GENERAL PURPOSE GROUT is a pumpable, shrinkage-compensated, flowable cementitious “Class A” grout with extended working time to suit local ambient temperatures.
PROPERTIES
- Easy to use (ready to mix powder)
- Easy to mix, only add water
- Adjustable consistency
- Very good flow characteristics
- Rapid strength development
- High final strengths
- Initial expansion by gas generation
- Impact- and vibration resistant
- Non-corrosive
- Not flammable, non-toxic
- Shrinkage compensated
Applications
- To grout bearings, machine foundations, columns joints in precast construction etc.
- To grout anchors in concrete.
- To grout cavities, gaps and voids in concrete.
UPGRADE CRACK FIX
READY TO USE CRACK FILLING POWDER
UPGRADE CRACKFIX is a ready to use non-shrink repair mortar for non-moving cracks in plasters and walls providing self-curing and excellent adhesion with substrate both for vertical and horizontal application.
PROPERTIES
- Only water to be added
- Non-shrink
- For both internal and external surfaces
- Hairline cracks should be opened to at least 1mm for ease of application.
- Can be applied on damp surfaces but not on cracks with running water Non-staining
- UV resistant. For non-moving cracks, up to 5mm wide in plasters and walls
- Self-curing and excellent adhesion with
- Substrates both for vertical and horizontal application.
- Not suitable for typical stress cracks at Junctions of wall and columns, lintel beam and masonry etc.
Applications
- For repairing cracks on RCC surfaces, plasters and masonry walls
- Suitable for both vertical and horizontal applications in buildings, toilets, balconies etc. wherever hairline cracks are observed.
UPGRADE SMART MICRO CONCRETE
READY TO USE NON-SHRINK, CEMENTITIOUS MICRO CONCRETE
UPGRADE SMART MICRO CONCRETE is a factory designed pourable, shrinkage compensated, high performance microconcrete with selected cement, aggregate and other chemicals. Recommended water and coarse aggregateto be added at site as per requirement.
PROPERTIES
- Easy to use (ready to mix powder)
- Easy to mix, only add water
- Adjustable consistency
- Very good flow characteristics
- Rapid strength development
- High final strengths
- Initial expansion by gas generation
- Impact- and vibration resistant
- Non-corrosive
- Not flammable, on-toxic
- Shrinkage compensated
Applications
- Upgrade Upgrade Smart Micro Concrete is used in the following places:
• To grout bearings, machine foundations, columns joints in precast construction etc
• To grout anchors in concrete
• To grout cavities, gaps and voids in concrete